Hardware modifications
I have done modifications to either expand the capability of the machine or replace faulty parts
- Added a switched plug to start/stop the machine (imperative for safety)
- Structure reinforcment with laths
- Screwed Rubber feets
- Installed a geared extruder to replace the weak original one
- Replaced the non-flat bed by an aluminium one
- Set the spool on the top of the printer
- Printed new arms after having broken one
- Replaced the SD card by a faster one to double the transfer speed
- Glued the fan on its support, as vibration were separating it from support
Software modifications
they are described in Fisher configuration